This 1TB Angelbird AtomX SSDmini is custom designed to fit into a variety of Atomos products, while maintaining high data throughput rates necessary for a 4K workflow. It fits perfectly into the Atomos Ninja V, Ninja Flame, Ninja Inferno, and Shogun Inferno. An optional adapter handle enables using this SSD with the Shogun Studio, Sumo 19, and Sumo 19M.
Although 20% smaller than an average SSD, the SSDmini makes no concession to size and features a formidable 550/500 MB/s read and write speeds. Incorporating Stable Stream technology so you don't drop any frames. The SATA III connector enables connecting to a standard SATA III port when it is time to transfer your footage.
- Supports capturing:
- CDNG up to 4K 30p
- ProRes RAW HQ 5.7K up to 30p
- 4K 60p and 2K 240p
- Supported Codecs:
- Apple ProRes: 4k60p and 2k240p
- Avid DNx: 4k60p and 2k240p
- Apple ProRes RAW: 5.7k30p, 4k60p and 2k240p
- CDNG: 4k30p
- Shock, temperature, X-Ray and magnetic proof
- Supports the entire Atomos range of Ninja and Shogun devices, plus-with the use of an adapter handle-even the Sumo19, Sumo19M and Shogun Studio
|Connections||1 x SATA (SATA III)|
|Interface||SATA III (6 Gb/s)|
|Maximum Read Speed||560 MB/s|
|Maximum Write Speed||520 MB/s|
|Endurance (Total Bytes Written)||3000 TB|
|Mean Time Between Failures (MTBF)||2,400,000 Hours|
|DC Input Power||5 VDC|
|Power Consumption||0.35 W (Idle)
3.5 W (Maximum)
|Dimensions||3.15 x 2.97 x 0.37" / 80 x 75.5 x 9.3 mm|
|Weight||3.2 oz / 90.0 g|
|Package Weight||0.265 lb|
|Box Dimensions (LxWxH)||4.9 x 4.45 x 0.85"|
The C-SATA USB 3.1 Type-C to SATA Adapter from Angelbird converts your internal hard drives and solid-state drives into an external drive, which can be used by computer systems featuring a USB Type-C port. The adapter is compatible with 2.5" and 3.5" drives sporting a SATA interface as well as systems running on a Windows, Mac, Linux, or Android operating system. Additionally, the adapter supports TRIM and UASP technologies, so the drive can maintain its performance and reliability.
The USB 3.1 Type-C interface transfers data at a rate of up to 10 Gb/s, while the SATA connector offers speeds of up to 6 Gb/s. For drives requiring additional power, a 12V port is on board, allowing you to connect an optional power adapter.
The AngelBird USB Type-C Female to USB Type-A Male Adapter allows you to connect USB Type-C devices to a computer's USB Type-A port. The adapter supports USB 3.1 Gen 2 ports for data transfer rates of up to 10 Gb/s, as well as UASP and TRIM support for optimizing external hard drive functionality. Active Switching Logic adapts to the orientation of the USB Type-C connector, optimizing performance no matter which way you plug it in.